Deco Color-Brake Caliper Spray Paint 3pc Kit 400ml

What you get:

Brake Caliper Paint 400ml x 1

Clear Coat Paint 400ml x 1

Anti-Corrosive Paint 400ml x 1

Brake Caliper 

High quality paint for brake calipers and drums, which gives them special sporty appearance. 

Very popular for optical tuning of cars and motorbikes. 

Brake caliper line has one of the best reputations among competitive products on the market. 

Notice:

Best result when applied at 10-25?C 

Petrol resistance 

Resistant to abrasion and weather conditions 

Heat resistance up 150?C 

Protects against corrosion 

High gloss 

Short drying time: 10-15 min 

Touch dry: 30-40 min; 

Hardened: 24 h 

Efficiency 1,5-2 m_ depending on colour and type of surface by one application 

8 most common colours in RAL system 

For indoor and outdoor use 

Capacity 400 ml 

Usage: 

Before applying read carefully instructions on the container and use according to the manufacturer?s recommendations. 

Recommended substrate conditions: 

Preparing the substrate is very important action influencing the quality and life of varnish coating. 

Fundamental principle, which relate to all surfaces prepared to painting is to grind, degrease and dry out. 

After drying the primed surface should be grinded with fine-grained abrasive paper (e.g. P600). 

Method of use: 

Apply product at temperature about 10-25?C (optimum temperature for good varnish drying). 

Drying time depends also on air humidity and product density. 

Painting should be made in well ventilated room. 

Prior to commencing painting, shake the container for about one minute, which will help mix the varnish by the ball found inside. 

Perform the test spray. 

Apply the varnish with few thin layers rather than one thick layer, from the distance of 25-30 centimetres. 

Following applying each layer, wait a few minutes. 

Following the completion, clean the nozzle. 

Put the container upside down, pressing the nozzle for the period of three seconds. 

Anticorrosive Primer 

Paint which improves adhesion. 

Compatible with all paint systems (alkyd, acrylic, nitro-combination) water and solvent based. 

Designed for priming surfaces made of metal, wood, aluminium, stone, concrete, plastic surfaces, except of some plastics and styrofoam. 

Wide range of application hobby and professional works: at home, garden, automotive and industry. 

Notice: 

For surfaces made of PUR, PS, PA, EPDM, ABS, GfK, Hart _ PCV use Plastic Primer DECO COLOR previously. 

Best result when applied at 10-25?C. 

Protects against corrosion 

Very good covering 

Possibility of grinding when wet or dry 

Petrol resistance Short drying time: 5-8 min 

Touch dry: 15-20 min; 

Hardened: 10-14 h 

Efficiency 1,5-2 m_ depending on colour and type of surface by one application 

Matt finish of painted surface 

4 colours offer: gray, white, red oxide, black 

For indoor and outdoor use 

Capacity 400 ml 

Usage: 

Before applying read carefully instructions on the container and use according to the manufacturer?s recommendations. 

Recommended substrate conditions: 

Preparing the substrate is very important action influencing the quality and life of varnish coating. 

Fundamental principle, which relate to all surfaces prepared to painting is to grind, degrease and dry out. 

Surface should be grinded with fine-grained abrasive paper (e.g. P600). 

Method of use: 

Apply product at temperature about 10-25?C (optimum temperature for good varnish drying). 

Drying time depends also on air humidity and product density. 

Painting should be made in well ventilated room. 

Prior to commencing painting, shake the container for about one minute, which will help mix the varnish by the ball found inside. 

Perform the test spray. 

Apply the varnish with few thin layers rather than one thick layer, from the distance of 25-30 centimetres. 

Following applying each layer, wait a few minutes. 

Following the completion, clean the nozzle. 

Put the container upside down, pressing the nozzle for the period of three seconds.