Deco Color-Eco Revolution 400ml

High quality acrylic water-based lacquer.

Perfect fits for use directly on styrofoam / polystyrene and for painting surfaces made of metal, wood, ceramics, glass, wicker, cardboard, fabrics, fresh and artificial flowers, and some plastics.

Lacquer without aggressive odor, environmentally and human friendly.

Product dedicated for artists and decorators. Wide range of application hobby and professional works: at home, garden, automotive and industry.

Notice:

For surfaces made of PUR, PS, PA, EPDM, ABS, GfK, Hart _ PCV use

Plastic Primer DECO COLOR previously. Best result when applied at 10-25?C.

Special, high covering of painted surface

High gloss; Additionally black and white also in matt finish

Intensity of colours

Short drying time: 20-30 mins

Touch dry: 60 min; Hardened: after 24 h

All the adjusts can be done up to 20 min

Water resistance is achieved after 5-6 days

Efficiency 1,5-2 m_ depending on colour and type of surface by one application

Hard acrylic coating resistant to abrasion and mechanical damages

Variety of colours: over 28 most common colours in RAL system

For indoor and outdoor use

Capacity 400 ml

Usage:

Before applying read carefully instructions on the container and

use according to the manufacturer?s recommendations.

Recommended substrate conditions:

Preparing the substrate is very important action influencing the quality and life of varnish coating. Fundamental principle, which relate to all surfaces prepared to painting is to grind, degrease and dry out. After drying the primed surface should be grinded with fine-grained sandpaper (e.g. P600).

How to use:

Apply product at temperature about 10-25?C (optimum temperature for good varnish drying). Drying time depends also on air humidity and product density. Painting should be made in well ventilated room. Prior to commencing painting, shake the container for about one minute, which will help mix the varnish by the ball found inside. Perform the test spray. Apply the varnish with few thin layers rather than one thick layer, from the distance of 25-30 centimeters. Following applying each layer, wait a few minutes. Following the completion, clean the nozzle. Put the container upside down, pressing the nozzle for the period of three seconds.