***Satin Kit Only Comes With 3 Cans*** (Without Clear Top Coat)
Deco Color-All 4 Alloy Wheels Refurbishing Mega Deluxe Kit 5 Colors
1x500ml ACRYL PRIMER 1K + 2x500ml MEGAFELGA + 1x500ml ACRYL CAR LINE PROTECTIVE TOP CLEAR COAT
ACRYL PRIMER 1K_500ML
Fast drying 1K universal primer with perfect covering properties. Protects against corrosion. Improves adhesion of topcoat. Compatibile with all paint systems (alkyd, acrylic, nitro-combination) water and solvent based. Designed for priming surfaces made of metal, wood, aluminium, stone, concrete, plastic surfaces, except of some plastics and styrofoam. Wide range of application hobby and professional works especially at automotive.
Notice:
For surfaces made of PUR, PS, PA, EPDM, ABS, GfK, Hart _ PCV use Plastic Primer DECO COLOR previously.
Best result when applied at 10-25?C.
Protects against corrosion
Very good covering
Fills unevenness up effectively
Possibility of grinding when wet or dry
Petrol resistance
Short drying time: 5-8 min
Touch dry: 15-20 min; Hardened: 10-14 h
Efficiency 2-2,5 m_ depending on colour and type of surface by one application
Matt finish of painted surface
For indoor and outdoor use
Capacity 500 ml
MEGAFELGA 500ML
Professional acrylic lacquers for alloy wheels and rims of cars motorbikes and other vehicles made of plastic, aluminium and other metals. Due to Incredible fast drying time and perfect coverage MEGAFELGA by DECOCOLOR has one of the best reputations among competitive products on the market.
Notice:
For surfaces made of PUR, PS, PA, EPDM, ABS, GfK, Hart _ PCV use Plastic Primer DECO COLOR previously
Best result when applied at 10-25?C.
INCREDIBLE drying time even up to 5 minutes !
Touch dry: 15-20 min; Hardened: 16-20 h
Perfect covering
Efficiency 2-2,5 m_ depending on colour and type of surface by one application
Very good adhesion
Creates hard coating resistant to scratches and hits
Anticorrosive properties
Petrol resistance
Resistant to weather conditions
For indoor and outdoor use
Capacity 500 ml
ACRYL CAR LINE PROTECTIVE TOP CLEAR COAT PROTECTION 500ML
Fast drying acrylic lacquer (short car?s line) used for small paint corrections and maintenance. Especially suitable for painting machines and their parts, equipment, aluminium constructions, tools, vehicles, steel furnitures etc. Also used for surfaces made of wood, ceramics, glass, wicker, cardboard and some plastics. Used as an additional top coat protection of painted surfaces.
Notice:
For surfaces made of PUR, PS, PA, EPDM, ABS, GfK, Hart _ PCV use Plastic Primer DECO COLOR previously.
Best result when applied at 10-25?C.
Faster drying time even up to 5 minutes !
Touch dry: 15-20 min; Hardened: 16-20 h
Efficiency 2-2,5 m_ depending on colour and type of surface by one application
Very good covering
High gloss
Creates hard coating resistant to scratches and hits
Anticorrosive properties
Petrol resistance
For indoor and outdoor use
Capacity 500ml
Usage:
Before applying read carefully instructions on the container and use according to the manufacturer?s recommendations.
Recommended substrate conditions:
Preparing the substrate is very important action influencing the quality and life of varnish coating. Fundamental principle, which relate to all surfaces prepared to painting is to grind, degrease and dry out. After drying the primed surface should be grinded with fine-grained abrasive paper (e.g. P600).
Method of use:
Apply product at temperature about 10-25?C (optimum temperature for good varnish drying). Drying time depends also on air humidity and product density. Painting should be made in well ventilated room. Prior to commencing painting, shake the container for about one minute, which will help mix the varnish by the ball found inside. Perform the test spray. Apply the varnish with few thin layers rather than one thick layer, from the distance of 25-30 centimetres. Following applying each layer, wait a few minutes. Apply kit in following way: 1st Acryl Primer 1K; 2nd Megafelga; 3rd (last) Acryl car line protective top clear coat protection.
Apply each product separately when covered surface is already dry. Following the completion, clean the nozzle.
Put the container upside down, pressing the nozzle for the period of three seconds.
